DMA179 - T-Rex Assignment

So for this project we were instructed to make a scale clay replica of a T-Rex tooth. For this I used a box of super sculpy that I bought at the school book store. Before i started construction of my tooth I had to do a little bit of research into what the dimensions are and what the tooth looked like. I came across a lot of different info that ranged from teeth that were 4 inches all the way to 10 inches. I chose to do mine at a solid 7.5 inches to make sure it was big enough that I could add some details and get a good shot for my poster.  For the interior construction of the tooth I used a whole bunch of tin foil, I just scrunched it up and molded it to the basic form I wanted. After i was happy with the basic form I took a bunch of clay and started to layer it over top the tin foil.With a little bit of playing around I had my tooth, I used my nails to make the serrated edge.  After cooking it in the oven for a bit I panted it using some paints that were laying around the house. This is the final product.

Next I started to do some research into what kind of font the ROM uses for the dinosaur exhibits. After spending too much time going no where and exhausting all of my resources I found a font that I thought worked fairly well for the poster. Below is the style guide I came up with for my poster. I used the text Pirulen that i found on a free font website for the heading and sub heading. I used Kalinga as the font for the body because it looked like some of the font i saw on the ROMs site and it is still easy to read. 

After completing this step, work on my poster kicked into full gear. After spending a fair bit of time playing around with a few different designs I came up with my final product which can be seen below. i decided to use gry for the the background because its a nice neutral color and i diffused a picture of a T-rex skeleton into the background to give it a bit of dimension and make it less boring. One problem I had was the black type for the paragraph on the grey background. Originally it was a bit hard to read with the orange of the tooth there as well so I decided to but a faded grey background behind it. this kinda separated it from the background and the tooth without being too distracting.

DMA101 - Sports Logo Vectorization

This is what the logo first looked like after I had gotten the yellow, blue and white done. I had this part done prety quick with out much fuss.

Next I started adding in the details like the orange in the eye and the accents as well as the light blues. The orange parts were a little bit trickier than I thought they would be just because of the fact that there was a lot of curved parts to them. These took a bit of time to work out because they tended to loop over each other and produce odd looking shapes but eventually I got it figured out. I also used guides to make sure the flat parts of the light blue area would line up properly everywhere and provide good spacing for when i added the light greys.

This part ended up being the most frustrating part. Adding the light greys and light blue over the white in the teeth. I had to make sure to blend the lines in so that there was a smooth transition from white to colour and I also had to make sure the colour overlapped the white onto the dark blue a little bit as to make sure none of the white came through.

This is what the final vectorized Nashville Predators logo ended up looking like. I was quite pleased with the outcome considering this was my first real attempt at vector art.

DMA204 - Product Shot

Below are 2 pictures that I took for a project in my photography class. We were instructed to do a product shot and these are the two best shots in my opinion. They were shot using the lighting in my room and a Monster t-shit I own, the shirt was used as a backdrop in one and the base in another. For the first shot I used an add in a BMX magazine as a backdrop. I wasn't sure if we could do that so  handed in the bottom one for grading.